PTFE (Polytetrefluoroethylene) Virgin Plastic Sheet

(No reviews yet) Write a Review
Calculated at Checkout
Notice: The dimensions you request must fit within the piece you are ordering! Each cut also requires 1/4" for the cutting width of the blade.
Adding to cart… The item has been added
Order in the next to Ship

For large or custom orders, click the add to quote button to put together a custom order request.

PTFE (Polytetrefluoroethylene) Virgin Plastic Sheet Info

Polytetrefluoroethylene (PTFE) - This soft formable fluoropolymer is often used in high temperature environments due to its stability at temperatures up to 500 degrees F. It has excellent electrical insulating properties and is both weather and chemical resistant. Note: The sheets may be warped / wavy, because this is a soft formable plastic. Thinner sheets are skived.


  • Weather resistant
  • Outstanding chemical resistance
  • Stable at high temperatures
  • Very low friction
  • Excellent electrical insulator
  • Very low moisture absorption


  • Scientific equipment
  • Chemical resistant tubing
  • Bearings and bushings
  • Valve components
  • Seals and gaskets
  • Semiconductor equipment

Cut Tolerance +0" -.25"

Tensile Strength (psi): 1,500-3,000
Impact Strength (ft-lbs/in): 3.5
Specific Gravity: 2.15
Machinability: 90%
Coefficient of Thermal Expansion (in/in/°F x 10-5): 8.9
Water Absorption (24hr Immersion): <.01
Dielectric Strength (V/mil): 400-500
Flexural Modulus of Elasticity (psi): 72,000