White Professional HDPE Cutting Board

Description

King CuttingBoard® is a solid high-density polyethylene (HDPE) sheet made for food applications, including cutting boards, butcher blocks, and food preparation, packaging, and processing work. The non-porous surface does not absorb food odors and is easy to clean and sanitize.

King Plastic makes the sheet with its K-Stran™ process for flatness and consistency. It is the natural white color of polyethylene with a matte finish on both sides. King CuttingBoard® is NSF listed for Standards 2 and 51 for direct and indirect food contact and is made from FDA- and USDA-approved material. The raw material does not contain BPA or phthalates.

This is raw material, so the edges are not finished.

Cut tolerance: +0.0″ / −0.2″

Advantages

• Food-contact listing: NSF listed for direct and indirect food contact in commercial food processing
• Non-porous surface: does not absorb food odors; easy to clean and sanitize
• Dishwasher safe: can be washed in commercial or residential dishwashers
• Matte finish: the same durable surface on both faces, so either side can be used
• Chemical resistance: most chemicals other than the harshest solvents and acids have little effect
• No grain direction: parts can be laid out anywhere on the sheet
• Fabrication friendly: cuts, routes, drills, and machines with woodworking tools and CNC equipment

Applications

• Commercial and consumer cutting boards
• Butcher blocks
• Food preparation and packaging work areas
• Buffets and salad bars
• Food processing components and other fabricated HDPE parts

Fabrication and Care Notes

Use standard woodworking tools such as table saws, routers, and drills, or a CNC router. A carbide saw blade gives a crisp edge, and carbide router bits with two to four flutes are recommended. The sheet cannot be painted and standard adhesives are not recommended, so assemble parts with stainless steel mechanical fasteners. For screws, drill pilot holes followed by an oversized hole in the sheet to allow for expansion and contraction.

Wash in a dishwasher, removing the board before the drying cycle to air dry, or by hand with hot, soapy water. Scrub lightly with a nylon brush, since excess force can mar the finish. Sanitize with 1 teaspoon of bleach per quart of water; do not use 100% chlorine made for swimming pools. A paste of 1 teaspoon each of baking soda, salt, and water helps remove surface stains.

Do not expose the sheet to sustained temperatures above 180°F; it melts under extreme heat. Keep teak oil, wood preservatives, and uncoated metals away from the surface, because they can leave permanent stains. Do not mark it with pens, pencils, or markers; use a china marker or wax pencil for layout. The sheet is not UV stabilized and is intended for indoor use.

Product Resources

Preview	Category	Type	Resource	File	Download
	Product Information	Brochure / Product Sheet	King CuttingBoard Product BrochureHighlights features, benefits, and applications of King CuttingBoard high-density polyethylene sheets for food service environments.	PDF0.72 MB	↓ Download
	Guides & Instructions	Care & Handling Guide	King CuttingBoard Care and Maintenance GuideCare, cleaning, and maintenance instructions for King CuttingBoard plastic sheets.	PDF1.04 MB	↓ Download
	Technical Reference	Technical Data Sheet	King CuttingBoard Technical Data SheetPhysical properties and technical specifications for King CuttingBoard HDPE sheets.	PDF0.13 MB	↓ Download
	Safety & Compliance	Safety Data Sheet (SDS)	King CuttingBoard Safety Data SheetProvides safety information for King CuttingBoard HDPE sheets, covering hazard identification, first aid, handling, storage, and exposure controls.	PDF0.08 MB	↓ Download
	Technical Reference	Chemical Resistance Guide	King HDPE Chemical Resistance ChartChemical compatibility and resistance ratings for King HDPE across various substances.	PDF0.44 MB	↓ Download
	Guides & Instructions	Fabrication Guide	King Plastic CNC Quick Fact SheetProvides quick fabrication and CNC routing guidelines for King Plastic polymer sheets like StarBoard and ColorCore.	PDF0.06 MB	↓ Download
	Guides & Instructions	Fabrication Guide	King Plastic General CNC Information and GuidelinesGeneral CNC machining tips, tool recommendations, and operational guidelines for King Plastic polymer sheets.	PDF0.09 MB	↓ Download
	Product Information	Product Sheet	King CuttingBoard FAQFrequently asked questions and answers regarding King CuttingBoard HDPE food preparation sheets.	PDF0.11 MB	↓ Download
	Safety & Compliance	Compliance Document	King Plastic California Proposition 65 NoticeProvides regulatory compliance information regarding California Proposition 65 for King Plastic products.	PDF0.56 MB	↓ Download
	Guides & Instructions	Application Guide	King Plastic Thermal Expansion and Contraction WorksheetA step-by-step worksheet to help calculate thermal expansion and contraction for King Plastic HDPE products.	PDF0.05 MB	↓ Download
	Product Information	Product Sheet	King CuttingBoard Family of Products FlyerOverview flyer detailing features and options for the King CuttingBoard family of polymer sheets.	PDF2.80 MB	↓ Download